Jyt-H CE Approved Lamination Label Stock Manufacture Customized Automatic Machine

• After-sales Service：One Year Guarantee
• Warranty：One Year Guarantee
• Type：Roll Coater
• Driven Type：Mechanical
• Automatic Grade：Automatic
• Packaging Material：Wood

=== Base Info ===

• Model NO.：JYT-H
• Packaging Type：Cans
• Application：Electronics, PE, EVA, Paint, Shoes, Fabric, Sponge
• Feture：Hot Melt Coating&Laminating
• Speed：50-200m,Min
• EPC：2 Sets
• Glue：Hot Melt Glue
• Product Application：Self Adhesive Tape Label
• Transport Package：Wooden Case
• Specification：CE & SGS
• Trademark：jiayuan
• Origin：Ruian City of Zhejiang Province
• HS Code：8439300000
• Production Capacity：30 Sets,Month

=== Description ===

Basic Info.

Model NO. JYT-H Packaging Type Cans Application Electronics, PE, EVA, Paint, Shoes, Fabric, Sponge Feture Hot Melt Coating&Laminating Speed 50-200m/Min EPC 2 Sets Glue Hot Melt Glue Product Application Self Adhesive Tape Label Transport Package Wooden Case Specification CE & SGS Trademark jiayuan Origin Ruian City of Zhejiang Province HS Code 8439300000 Production Capacity 30 Sets/Month

Product Description

Main Characteristics Of Hot Melt Coating Machine:

1. Both the first and second unwind adopt self-existent machine frame, with automatic edge controller, which makes lamination more ideal.
2. Unwinds collocate electric-motor uploading and downloading functions.
3. This machine has all functions of JYT-B Hot Melt Coating Machine.

Range of Application of Hot Melt Coating Machine:

This machine is used for producing self-adhesive products, such as self-adhesive tapes, double-side tapes, fabric tapes, double-side foam tapes, duct tapes, craft tapes, clean adhesive tapes, masking tapes, aluminum foil tapes, etc. And also suitable for laminating different material such as non-woven, filter materials, medical materials, label, etc.




Part Two: Introduction
(one) machine configuration

1. The unwind device is jointed of quadrate steel, groove steel and iron steel

2. The main machine configuration adopts 25mm steel plate and steel tube to brace.

3. Driving-shell adopts 1.5mm armor plate

4. The rewinder is installed in the main configuration.

(Two) hot melt tank

1. The tank shell is jointed of quadrate steel, groove steel and 1.2mm steel plate

2. The hot melt is founded of aluminum alloy there is three layers constructions, the inner layer is coated with anti-sticking Teflon layer.

3. Adopt molten heater

4. The glue pump adopts metric gear pump that can bear high temperature

5. Collocate exact filter

6. The glue feeding pump adopts gear pump electric-motion frequency conversion to adjust speed

7. The temperature adopts PID controller. The two layers are controlled independently

8. The high temperature is 210° C

9. The heating power: 24kw